Bougie Print

DTF Transfers

How to press DTF transfers

Four settings decide how a transfer turns out: time, temperature, pressure and peel. The same card comes in every order.

Press settings

Temperature
320°F (160°C). Anywhere from 315°F to 330°F works.
Time
10 to 15 seconds. Use the longer time on thick fabrics or a home press.
Pressure
Medium-firm to firm
Peel
Warm peel. Wait 10 to 20 seconds, then peel slowly.

Step by step

  1. Heat your press to 320°F (160°C).
  2. Pre-press the garment for 5 seconds to remove moisture and wrinkles.
  3. Cut your designs apart and place one on the garment, printed side down against the fabric.
  4. Press for 10 to 15 seconds at medium-firm to firm pressure.
  5. Let it cool for 10 to 20 seconds, until the film is no longer hot to the touch. Then peel the film slowly, low and flat.
  6. Optional, for the longest wear: cover the design with parchment, butcher paper or a press sheet and press again for 10 seconds at the same temperature.

Pressing questions

Something did not stick or looks wrong. What now?
Contact us with a photo of the transfer and the garment. If we misprinted it or the film arrived damaged, we reprint it or refund you. Contact us